Meet the Auto Rust Repair & Shield Paste, the 5-part chemical formula engineered to penetrate microscopic metal pits, convert active rust, and seal steel against winter road salt in a single brush-on coat.
🧪 Nothing Hidden — What Is In Every 30g (1 oz) Jar:
- 200# Solvent Oil: Carries active ingredients deep down into microscopic metal pits that sandpaper and wire brushes cannot reach.
- Tannic Acid: Chemically converts orange rust into a stable, inert layer so oxidation stops at the root.
- Aluminum Polyphosphate: Protects the surrounding bare metal around the spot.
- Bentonite Clay: Keeps the paste thick so it clings to vertical rocker panels, wheel arches, and door edges without dripping.
- Alkyd Resin & Titanium Dioxide / Barium Sulfate: Seals out water and road salt in a tough, paintable barrier (available in 6 vehicle colors).
🔧 4-Step Driveway Application (10 Minutes):
- 1. Clean it up: Knock off loose, flaky rust with a wire brush or sandpaper, then wipe clean and dry. No bare-metal grinding or primer needed.
- 2. Brush on an even coat: Work the paste into the spot, wait 10 minutes, then wipe off anything the metal did not take.
- 3. Let it set: Most spots cure hard in 24 to 48 hours. Bad spots can get a second thin coat the next day.
- 4. Drive it: Leave as-is underneath, or sand smooth and topcoat once cured.

