Ga direct naar productinformatie
1 van 16
★★★★★ Rated 4.8/5 | Based on 10500+ Verified Truck, SUV & Daily Driver Reviews

Rust Repair Paste

Rust Repair Paste

Stop rust down in the microscopic pits and seal exposed metal in one 10-minute coat—thick paste that clings to vertical panels without dripping or sanding to bare metal.

  • Helps Stop Rust From Spreading — Converts & Seals in 1 Coat
  • Thick Bentonite Paste — Clings to Vertical Panels, No Runs or Drips
  • Shields Against Road Salt, Slush & Winter Moisture
  • Available in 6 Colors & Paintable Once Cured (24–48 Hours)
  • 60-Day Money-Back Guarantee — Test It on Your Worst Spot
Color
Order Today and Receive 4 FREE Driveway Repair Bonuses ($69 Value)
FREE $18
Precision Applicator Brush
WINTER SALT SHIELD GUIDE PDF
FREE $24
Pre-Winter Salt-Belt Rust Guide
★ GUARANTEE ★ 60 DAY TEST MONEY-BACK
FREE $15
60-Day Money-Back Guarantee
10-MINUTE PREP STEPS
FREE $12
10-Minute Driveway Repair Checklist
Pre-Winter Demand High: Selling Out Fast — 89% of Current Batch Sold
Seal rust spots before the first road salt hits:
October batch SOLD OUT
November 17th 89% SOLD
December 16th 0% reserved
How It Works, Ingredients & Specifications

Meet the Auto Rust Repair & Shield Paste, the 5-part chemical formula engineered to penetrate microscopic metal pits, convert active rust, and seal steel against winter road salt in a single brush-on coat.

🧪 Nothing Hidden — What Is In Every 30g (1 oz) Jar:

  • 200# Solvent Oil: Carries active ingredients deep down into microscopic metal pits that sandpaper and wire brushes cannot reach.
  • Tannic Acid: Chemically converts orange rust into a stable, inert layer so oxidation stops at the root.
  • Aluminum Polyphosphate: Protects the surrounding bare metal around the spot.
  • Bentonite Clay: Keeps the paste thick so it clings to vertical rocker panels, wheel arches, and door edges without dripping.
  • Alkyd Resin & Titanium Dioxide / Barium Sulfate: Seals out water and road salt in a tough, paintable barrier (available in 6 vehicle colors).

🔧 4-Step Driveway Application (10 Minutes):

  • 1. Clean it up: Knock off loose, flaky rust with a wire brush or sandpaper, then wipe clean and dry. No bare-metal grinding or primer needed.
  • 2. Brush on an even coat: Work the paste into the spot, wait 10 minutes, then wipe off anything the metal did not take.
  • 3. Let it set: Most spots cure hard in 24 to 48 hours. Bad spots can get a second thin coat the next day.
  • 4. Drive it: Leave as-is underneath, or sand smooth and topcoat once cured.
Reviewer
A much easier fix than waiting until you're dealing with a full rust-out and a $1,200 body shop bill.
Dave (Prestige Collision & Auto, Dayton, OH)
Shipping & Returns

We offer fast, tracked, and insured delivery straight to your driveway. Orders dispatch promptly with protective packaging and include an automated tracking link via email within 24 to 48 hours. Free shipping is unlocked automatically on multi-jar bundles.

60-Day Money-Back Guarantee

Try it on your own vehicle. Brush it on your worst rust spot and watch how it holds up against rain, slush, and road salt. If you are not happy with the results, contact us within 60 days and we will refund your order.

Alle details bekijken

Real Repairs, Real Results — Rated 4.8/5 by 10,500+ Drivers

<h2>Real Repairs, Real Results — Rated 4.8/5 by 10,500+ Drivers</h2>

Living in Wisconsin means road salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it looks decent again. No special tools needed.

<h2>Real Repairs, Real Results — Rated 4.8/5 by 10,500+ Drivers</h2>

My car has 180k on it and the bed sides were starting to get brown spots pretty bad. Used this to clean them up before they turned into holes. Happy with how it turned out, especially for the price.

<h2>Real Repairs, Real Results — Rated 4.8/5 by 10,500+ Drivers</h2>

Tried spray rust converters before and they just ran right down my rocker panels before they could work. This thick paste stayed put on the door edge and sealed it solid in one afternoon.

<h2>Real Repairs, Real Results — Rated 4.8/5 by 10,500+ Drivers</h2>

utility trailer, and tractor steps. Ten minutes of brushing before the first snow and everything is locked down tight against winter brine.

MECHANIC REVIEWED & SALT-BELT TESTED

Stop a $30 spot before it becomes a $1,200+ repair

See why ASE-certified mechanics and high-mileage truck owners are ditching thin hardware-store sprays and sealing their steel before winter road salt arrives.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Mike Dalton

ASE Certified Mechanic

I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. This paste lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.

Dave

Prestige Collision & ...

A much easier fix than waiting until you're dealing with a full rust-out and a body shop bill. For surface rust on wheel arches, cab corners, and rockers where the steel is still solid, sealing the pits early saves drivers $400 per side easily.

Mike D.

2007 Toyota Tacoma Owner

Had rust on both cab corners of my 2007 Toyota Tacoma that was getting worse. Cleaned off the loose flakes, brushed this on, and it came out way better than I thought it would. Beats paying a body shop $400 per side.

Jason R.

2005 Chevy Tahoe Owner

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches on my 2005 Chevy Tahoe was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

WHY IT KEEPS COMING BACK

THE RUST YOU PAINTED OVER IS STILL ALIVE IN THE PITS

Rust does not just sit on top of the metal. It eats down into tiny microscopic pits that sandpaper and a wire brush cannot reach. When you paint or fill over those pits, trapped rust keeps eating—and by spring the paint is bubbling in the exact same spot.

200# Solvent Oil + Tannic Acid Penetrate The Pits

Solvent oil carries tannic acid deep into microscopic steel pits to convert active orange rust into a stable, inert layer, while aluminum polyphosphate protects the surrounding bare metal.

Bentonite Clay Clings To Vertical Rocker Panels

Thin liquid sprays run off door edges and rocker panels before they can penetrate. Bentonite clay keeps our formula thick so it stays exactly where you brush it—no runs, no drips, no messy overspray.

Alkyd Resin Seals & Colors In One 10-Minute Coat

Instead of drying to an ugly dark stain that still needs primer and topcoat, alkyd resin locks out road salt, slush, and water in 6 vehicle colors—or sand smooth and paint over once cured in 24 to 48 hours.

WHO IT'S FOR

Made for Any Steel That Sees Salt

Protect vehicles and equipment

Help protect exposed steel from salt and corrosion.

Tip: Apply a clean, even coat for dependable coverage.

Care for marine steel

Use on suitable metal surfaces exposed to moisture and salt air.

Tip: Follow product directions before each application.

Protect outdoor steel

Protect compatible outdoor metal items from weather exposure.

Tip: Test on a small area and follow the label directions.
Get My Bolura Jars
60-day money-back guarantee

Do The Math: $39.99 vs. $900–$2,100 Body Shop

97%

Keep At Least $860+ In Your Pocket: A body shop charges $400 per side or $900 to $2,100 to grind, fill, and repaint 3 coin-to-palm-sized spots. Two jars cost $39.99.

96%

10-Minute Brush-On Weekend Fix: Knock off loose flakes, brush on an even coat in 10 minutes, and drive ready after 24 to 48 hours of curing—no primer or bare-metal sanding.

93%

Built For Every Salt-Exposed Surface: Protects truck bumpers, wheel arches, cab corners, door edges, tailgate edges, trailer hitches, tractor steps, and metal gates.

Shop prices are rough estimates for small cosmetic rust repairs and vary by vehicle and spread. Built for surface rust and early spots, not structural holes.

One Rust Spot, One Winter: Cover It, or Seal It Once

Every fall, salt-belt drivers face the same choice. Touch-up paint looks fine in October, but the rust down in the pits is still eating. By January, salt water gets under the edge. By March, the paint lifts and flakes under your thumbnail. By next fall, you're buying another can—or facing a $1,200 body shop bill.

Brush this thick paste into the pits on a dry fall weekend before the first salt. It changes the rust and seals it in one coat so you can keep your paid-off truck running and looking decent for years.

Mechanic Reviewed For High-Mileage Trucks &amp; Daily Drivers

“I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive bodywork. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair.”

— Mike Dalton, ASE Certified Mechanic

20+ Years Automotive Experience · Surface Rust & Corrosion Specialist

18 shield check

60-Day Driveway Test Guarantee

Try it on your own vehicle. Brush it on your worst rust spot and watch how it holds up through rain, slush, and winter road salt. If you are not happy with the results, contact us within 60 days and we will refund your order.

Get My Rust Repair Jars

18 target

Converts Pit Rust & Seals In One Coat

18 target

Thick Paste Clings To Vertical Rockers (No Drips)

18 target

60-Day No-Questions-Asked Money-Back Trial

  • ★★★★★

    ''

    Mike D. (2007 Toyota Tacoma)

    Had rust on both cab corners that was getting worse. Cleaned it down, put this paste on there, and honestly it came out way better than I thought it would for a $39 jar. Beats paying a body shop $400 per side.

  • ★★★★★

    ''

    Jason R. (2005 Chevy Tahoe)

    Living in Wisconsin means salt eats everything. The rust around my rear wheel arches was getting embarrassing. Applied this over a weekend and now it actually looks decent again. Simple process, no special tools needed.

  • ★★★★★

    ''

    Chris L. (2009 Ford Ranger)

    My Ranger has 180k on it and the bed sides were starting to get those brown spots pretty bad. Used this paste to clean them up before they turned into holes. Happy with how it turned out, especially for the price.

1 van 3

Got Questions?

Everything you need to know about prep, color matching, heavy rust vs. holes, and coverage. Made for surface rust and early spots on steel and iron.

How is it different from spray paint, touch-up paint, or liquid rust converter?

Touch-up paint only covers the top while rust trapped in microscopic pits keeps eating and bubbles back every spring. Thin spray converters run right off vertical rocker panels before penetrating and still require primer and topcoat. Our thick bentonite-clay paste clings to vertical surfaces, carries tannic acid into the pits to convert rust, and seals it with alkyd resin in one coat.

Do I need to sand down to bare metal or use primer first?

No! Just knock off any loose, flaky rust with a wire brush or sandpaper and wipe the spot clean and dry. You do not need bare metal and you do not need primer. Brush on an even coat, wait 10 minutes, wipe off any excess the metal did not absorb, and let it cure for 24 to 48 hours.

Will it fix structural holes? How many spots does one jar cover?

It is engineered specifically for solid steel and iron with surface rust, paint bubbles, and early spots—not structural holes that have rotted all the way through (those require a body shop). Each 30g (1 oz) jar handles several coin-to-palm-sized spots; for multiple wheel arches, rocker panels, or trailers, we recommend the 2-pack or 4-pack bundle.

What if my vehicle color isn't one of the 6 colors? Can I paint over it?

Yes! The paste comes in 6 common vehicle colors to leave a clean finish right out of the jar. Once cured hard (24 to 48 hours), you can also sand it smooth and apply any automotive touch-up paint or metallic topcoat right over it for an invisible factory match.

What can I use it on, and what if it does not work for me?

Use it on any steel or iron exposed to salt and weather: truck bumpers, wheel arches, cab corners, rocker panels, door edges, tailgate edges, trailer hitches, boats, ATVs, tractor steps, farm equipment, and metal gates. Every order is backed by a 60-Day Money-Back Guarantee—test it on your worst spot risk-free.